Optical Power Meter
Power Meter checks the signal output power of the optical communication equipment in fiber optic networks.
The Power Meter is mainly used for checking the signal output power of the optical communication equipment in fiber optic networks. It measures the average power of a continuous light beam which is emitted from the equipment or other optic sources. It measures power in both 850nm / 1300nm (Multimode) and 1310nm / 1490nm / 1550nm (Single mode) respectively.
The Power Meter consists of a solid state InGaAs photo diode, signal power measurement circuitry, and a 2 Digits / 3 Digits LED display. Users just connect a fiber cable between the transmission port of the equipment and the universal interface on the Fiber Meter or connect to other light source. The product will show the exact amount of the received power (in dBm).
The universal connector can be used for all the most common fiber interfaces such as ST / SC / FC and it is suitable to test both Single mode and Multimode cables. With an optical 2.5 mm to 1.25 mm adapter, users can even test for 1.25 mm fiber interface.
1. Robust, handy design with LED digital readout.
2. Easy to check Multimode 850nm / 1300nm output power.
3. Easy to check Singlemode 1310nm / 1490nm / 1550nm output power.
4. Universal 2.5mm to 1.25mm adaptor for SC / ST / FC to LC or MU, 2 Digits / 3 Digits resolution and Low Voltage Battery warning LED display.
5. Measuring power in Multimode 850nm / 1300nm within -40 dBm ~ +5 dBm ranges.
6. Measuring power in 3 Digits Singlemode 1310nm / 1490nm / 1550nm within -40 dBm ~ +5 dBm ranges.
- Installation and Maintenance CATV / Telecom / FTTH in fiber optical fiber networks.
- Installation and Maintenance 4G / 5G mobile system.
- Installation and Maintenance data center network.
- Testing in standard laboratories.
- High throughput quality assurance.
- Related Products
The Fiber Checker is a very useful tool designed for checking the defects of a fiber cable. It emits a visible 650nm wavelength red laser light through fiber optic cables, then if there are breaks or defects in the fiber will refract the light, creating a bright glow around the faulty area.The universal connector can be used for all the most widespread fiber interfaces such as ST / SC / FC connector. It is suitable to test both Single mode and Multimode cables. With an optional 2.5 mm to 1.25 mm optional Adapter, you can easily test 1.25 mm diameter fiber LC or MU connector. The visibility is from 3 km to 5 km dependent upon the output power of the Fiber Checker.Internally there is also a specifically designed power circuit called an APC (Auto Power Control) circuit which provides steady power. The APC prevents unstable laser output when the battery is low.The LD output signal can be switched to CW or Pulse Mode to obtain different visual effects. There is a dust cap which will prevent dirt from getting into the LD connector. The cover also prevents accidental exposure of the laser beam into anyone's eyes.
Light Source is a handy instrument to provide you several wavelengths for testing the fiber equipment in an optical network and FTTx construction. Light Source is ideal for field or laboratory testing of optical communication systems at 850nm / 1300nm for datacom testing, 1310nm / 1550nm / CWDM 1270nm ~ 1610nm (20nm spans) for all WDM testing , as well as 1490nm for FTTx testing by changing the interchangeable SFP module. Light Source features zero warm up, superb productivity and is easy to use with its pocket-size and rugged handy design.With a LC / SC patch cord, the Light Source can be used for most widespread fiber interfaces such as LC / ST / SC / FC connectors. It is suitable to test both Singlemode and Multimode cables. Internally there is a specially designed power circuit called APC (Auto Power Control). The APC circuit provides continuous power which avoids unstable laser output when the battery is low. The LD output signal can be switched between Continuous Wave (CW) or Pulse Mode 270 Hz / 2 KHz Modulated Mode to simulate signal transmission. There is a dust proof cap which will prevent dirt from getting into the LD connector. The cap also helps avoid accidental exposure to the laser beam into your eyes.
FiTs, FiTs II
The FiTs is a handy instrument to provide several wavelengths for testing the fiber equipment in an optical network and FTTx construction. There are 650nm Fiber Checker & Light Source is ideal for field or laboratory testing of optical communication systems at visible light 650nm and 850nm / 1310nm / 1490nm / 1550nm . Light Source features zero warm up, superb productivity and is easy to use with its pocket-size and rugged handy design.