Handy analyzer for insertion loss and MPO type measurement
The MPO Analyzer can test multimode 12F MPO patch cord and distinguish MPO Type A / B / C. The testing result will be GO or NG for insertion loss. Also, it is capable of storing 300 data records.
1. 850nm transmitter & receiver.
2. 12 Fibers MPO Polarity check and testing.
3. Type A / B / C MPO patch cord identification and polarity checking.
4. MPO Patch Cord testing.
5. Insertion loss measuring & testing.
6. Output power measuring.
- 12F Fiber MPO Patch Cord testing.
- RoHS compliant.
- 12 channel GO or NG testing.
- Cost-effective MPO testing solution.
- Touch Panel manual.
- Portable Battery.
- 300 recording data.
- Related Products
Power Meter Hub
The Power Meter Hub is a handy tool and instrument to detect and measure the output power of several different 8 Channel wavelengths at the same time to test the fiber equipment in the optical network and FTTx construction. The Power Meter Hub is ideal for field or laboratory testing of optical communication system at 850nm / 1300nm / 1310nm / 1550nm / CWDM 1270nm ~ 1610nm (20nm spans ) for all CWDM testing, as well as 1490nm for FTTx by changing the interchangeable SFP module.
The MPO Tester is a very useful tool designed for checking the defects of a MPO arrayed fiber cable or MPO Connector. The MPO emits a visible 650nm wavelength visible red laser light through fiber optic cables, then if there are breaks or defects in the fiber will refract the light, creating a bright glow around the faulty area. The LD output signal can be all 12 Fibers switched to CW Mode to obtain different visual effects.
MPO Polarity Identifier
MPO Polarity Identifier is a very useful fitting tool which needs to go with MPO Tester to do the testing together. It can be used to check the type of MPO cable A. B or C rapidly, also the testing of SM cable or MM cable and the MPO Input/output port of PC or APC as well.
The Fiber Checker is a very useful tool designed for checking the defects of a fiber cable. It emits a visible 650nm wavelength red laser light through fiber optic cables, then if there are breaks or defects in the fiber will refract the light, creating a bright glow around the faulty area. The universal connector can be used for all the most widespread fiber interfaces such as ST / SC / FC connector. It is suitable to test both Single mode and Multimode cables. With an optional 2.5 mm to 1.25 mm optional Adapter, you can easily test 1.25 mm diameter fiber LC or MU connector. The visibility is from 3 km to 5 km dependent upon the output power of the Fiber Checker. Internally there is also a specifically designed power circuit called an APC (Auto Power Control) circuit which provides steady power. The APC prevents unstable laser output when the battery is low. The LD output signal can be switched to CW or Pulse Mode to obtain different visual effects. There is a dust cap which will prevent dirt from getting into the LD connector. The cover also prevents accidental exposure of the laser beam into anyone's eyes.