How does one identify the MPO Polarity and check for a MPO Fiber fault location using the MPO Polarity tester?

How does one identify the MPO Polarity and check for a MPO Fiber fault location using the MPO Polarity tester?

An easy and quick solution for checking defects and polarity of MPO cables
An easy and quick solution for checking defects and polarity of MPO cables

The MPO Polarity Tester is a 2-in-1 tool that combines both the MPO tester and MPO Polarity Identifier. The MPO Polarity Tester quickly identifies the type (A/B/C) of a 12-channel MPO cable ; it can also identify the type (SA/SB/SC) of a 8-channel MPO cable. The MPO Polarity Tester offers three (3) modes of operation - Flash, CW (Continuous Wave) and Scan.
The MPO Polarity Tester is used to quickly check the defects of a MPO arrayed fiber cable and/or MPO Connector. The MPO Tester emits a visible 650nm wavelength red laser light through the optical fiber cables; if there are breaks or defects in any given fiber the light will be refracted, thus creating a bright glow around the faulty area. The monitor will then display which channel is broken.

The following videos illustrate the use and operation of the MPO Polarity Tester:

Video

Identify the type SA/SB/SC of a 8-channel MPO cable.



Quick checking of defects in a MPO arrayed fiber cable and/or a MPO Connector .



How does one check a MPO Fiber fault location using the MPO tester?

The MPO Polarity Tester is used to check defects of a MPO arrayed fiber cable and/or MPO Connector. The MPO Tester emits a visible 650nm wavelength red laser light through the optical fiber cables; if there are breaks or defects in any given fiber the light will be refracted, thus creating a bright glow around the faulty area, and the monitor will then display which channel is broken.

Video

By rotating the control knob on the MPO tester one can determine which channel is broken.



Related Product
  • MPO 8/12 Fiber Polarity Tester - Easy and instant solution for checking defect and polarity of MPO cable
    MPO 8/12 Fiber Polarity Tester
    MPO Polarity Tester

    The MPO Polarity Tester is the useful tool designed for checking the defects of a MPO arrayed fiber cable and MPO Connector and identifying the type A/B/C of MPO cable rapidly. The testing works for both SM/MM cable and the MPO Input/output port of PC or APC as well. The MPO emits a visible 650 nm wavelength visible red laser light through fiber optic cables. If there are breaks or defects in the fiber, it will refract the light creating a bright glow around the faulty area.The LD output signal can be all 12 Fibers switched to CW Mode to display different visual effects.


  • MPO Defects Tester with 650nm visible red laser light - MPO Tester can check the defects of MPO arrayed fiber cable or connector.
    MPO Defects Tester with 650nm visible red laser light
    MPO Tester

    The MPO Tester is a very useful tool designed for checking the defects of a MPO arrayed fiber cable or MPO Connector. The MPO emits a visible 650nm wavelength visible red laser light through fiber optic cables, then if there are breaks or defects in the fiber will refract the light, creating a bright glow around the faulty area.The LD output signal can be all 12 Fibers switched to CW Mode to obtain different visual effects.



Press Release