High-speed Optical Transceiver 4 channel Power Meter for SR4/PSM4/CWDM4/LR4
HOT Pet is designed for 40 Gbps ~ 400 G optical networking power meters. It can measure 4 channels output power in the optical network at one time. The memory can record 600 data and data downloaded via USB Connections. The battery can last 6 hours.
1. For high speed 4 channel power meter measurement
2. MPO Connector
3. LC to MPO adaptor designed for QSFP+ & QSFP28 CWDM4/LR4/ER4 Transceiver Module
4. Offset Function
5. Automatic Standby Mode
6. Easy to export testing data to excel file
- For 400 G / 200 G SR4, SR8, LR8, CWDM8, PSM8 Transceiver modules output power measurement
- For 100 G SR4, LR4/ER4, CWDM4, PSM4 Transceiver modules output power measurement
- For 40 G SR4, LR4/ER4 Transceiver modules output power measurement
- Related Products
The Power Meter is mainly used for checking the signal output power of the optical communication equipment in fiber optic networks. It measures the average power of a continuous light beam which is emitted from the equipment or other optic sources. It measures power in both 850nm / 1300nm (Multimode) and 1310nm / 1490nm / 1550nm (Single mode) respectively.The Power Meter consists of a solid state InGaAs photo diode, signal power measurement circuitry, and a 2 Digits / 3 Digits LED display. Users just connect a fiber cable between the transmission port of the equipment and the universal interface on the Fiber Meter or connect to other light source. The product will show the exact amount of the received power (in dBm).The universal connector can be used for all the most common fiber interfaces such as ST / SC / FC and it is suitable to test both Single mode and Multimode cables. With an optical 2.5 mm to 1.25 mm adapter, users can even test for 1.25 mm fiber interface.
The Fiber Checker is a very useful tool designed for checking the defects of a fiber cable. It emits a visible 650nm wavelength red laser light through fiber optic cables, then if there are breaks or defects in the fiber will refract the light, creating a bright glow around the faulty area.The universal connector can be used for all the most widespread fiber interfaces such as ST / SC / FC connector. It is suitable to test both Single mode and Multimode cables. With an optional 2.5 mm to 1.25 mm optional Adapter, you can easily test 1.25 mm diameter fiber LC or MU connector. The visibility is from 3 km to 5 km dependent upon the output power of the Fiber Checker.Internally there is also a specifically designed power circuit called an APC (Auto Power Control) circuit which provides steady power. The APC prevents unstable laser output when the battery is low.The LD output signal can be switched to CW or Pulse Mode to obtain different visual effects. There is a dust cap which will prevent dirt from getting into the LD connector. The cover also prevents accidental exposure of the laser beam into anyone's eyes.
iBERT X1 mini
iBERT X1 mini is a bit error rate tester (BERT) designed for 0.1Gbps to 100Gbps AOC measurement. There are two interchangeable slot boards which include QSFP and SFP ports separately. Both QSFP and SFP ports follow QSFP MSA and SFP MSA. The user interface allows you to individually monitor bit error rate, error count and timer by connecting to PC via USB cable. The serial ID and Digital Diagnostics Monitor of transceiver module can also be monitored in the user interface.