12 Channels Optical Test Hub for testing optical emitter light source module
The OTH 4000 is an optical testing instrument which provides 12 channels L-I curve measurement. It is a 12 channels stable current sources and 12 channels optical power meters. The OTH 4000 is ideal for field or laboratory testing of optical emitter and light source.
1. 1U 19" rack mount design.
2. LD L-I Curve measurements.
3. 12-CH DVI Electrical signals 12-CH MPO.
4. USB interface to link PC and with friendly Graph User Interface (GUI).
- Standard laboratory applications.
- Active component fabrication.
- Lidar system fabrication.
- Related Products
OTH 3000 & OTH 300
OTH 3000 is an optical testing hub which provides both optical stable light sources and optical power meters. The universal main frame provides up to 36 Channels (OTH-3000), Mini OTH (OTH-300) accordingly for installing power meter or light source module. The optical test hub, OTH 3000 and OTH 300 are ideal for field or laboratory testing of optical network testing by changing the interchangeable module.
The Power Meter is mainly used for checking the signal output power of the optical communication equipment in fiber optic networks. It measures the average power of a continuous light beam which is emitted from the equipment or other optic sources. It measures power in both 850nm / 1300nm (Multimode) and 1310nm / 1490nm / 1550nm (Single mode) respectively.The Power Meter consists of a solid state InGaAs photo diode, signal power measurement circuitry, and a 2 Digits / 3 Digits LED display. Users just connect a fiber cable between the transmission port of the equipment and the universal interface on the Fiber Meter or connect to other light source. The product will show the exact amount of the received power (in dBm).The universal connector can be used for all the most common fiber interfaces such as ST / SC / FC and it is suitable to test both Single mode and Multimode cables. With an optical 2.5 mm to 1.25 mm adapter, users can even test for 1.25 mm fiber interface.
Light Source is a handy instrument to provide you several wavelengths for testing the fiber equipment in an optical network and FTTx construction. Light Source is ideal for field or laboratory testing of optical communication systems at 850nm / 1300nm for datacom testing, 1310nm / 1550nm / CWDM 1270nm ~ 1610nm (20nm spans) for all WDM testing , as well as 1490nm for FTTx testing by changing the interchangeable SFP module. Light Source features zero warm up, superb productivity and is easy to use with its pocket-size and rugged handy design.With a LC / SC patch cord, the Light Source can be used for most widespread fiber interfaces such as LC / ST / SC / FC connectors. It is suitable to test both Singlemode and Multimode cables. Internally there is a specially designed power circuit called APC (Auto Power Control). The APC circuit provides continuous power which avoids unstable laser output when the battery is low. The LD output signal can be switched between Continuous Wave (CW) or Pulse Mode 270 Hz / 2 KHz Modulated Mode to simulate signal transmission. There is a dust proof cap which will prevent dirt from getting into the LD connector. The cap also helps avoid accidental exposure to the laser beam into your eyes.