Company
About Us  
Founded in July, 2003, Liverage Technology Inc.is aimed to provide the best and advanced fiber optics active, fiber optics passive & wireless integration
Technologies products...
New Products  
pictures/modules/PDT/PDT060207001/20091915413870555.jpg
Fiber Meter

The Fiber Meter is mainly used for checking the signal output power of the optical communication equipment in fiber optic networks. It measures the average power of a continuous light beam which emits from the equipments or other optic sources. It measures power in both 850nm/1300nm (Multi-Mode) and 1310nm/1550nm (Single-Mode) respectively.

 

The Fiber Meter consists of a solid state InGaAs photo diode, signal power measurement circuitry, and a 2 digit s / 3 digits LED display. Users just connect a fiber cable between the transmission port of the equipment and the universal interface on the Fiber Meter. (Or connect to other light source) The product will show the exact amount of the received power value (in –dBm). The test ranges IS in multimode 850nm/1300nm wavelength and in singlemode 310nm/1550nm wavelength.

 

The universal connector can be used for all the most common fiber interfaces such as ST/SC/FC/LC/MU and it also suitable to test both single mode and multi mode cables. With an optical 2.5 mm to 1.25 mm adapter, users can even test for 1.25 mm fiber cables.

 

pictures/modules/PDT/PDT060207001/20091818471170555.jpg
Power Meter Hub

Power Meter Hub is a handy tool and instrument to provide to measure 8 CH several different wavelengths in the same time to test the fiber equipment in the optical network and FTTx construction. Power Meter Hub is ideal to measure 8 CH different wavelengths for field or laboratory testing of optical communication system at 850 nm / 1300 nm / 1310 nm / 1550 nm / CWDM 1270 nm ~ 1610 nm ( 20 nm spans ) for all CWDM testing , as well as 1490 nm for FTTx and by changing interchangeable SFP module. Power Meter Hub features zero warm up and is easy to use with box size and rugged design.

 

Internally there is a specifically designed smart circuit included to detect the input power and provide exact figure via USB interface. By connecting the USB to the PC the real input power figure can easily be read.

pictures/modules/PDT/PDT060207001/2009191542453343.jpg
Fiber Checker
The Fiber Checker is used for checking the defects of a fiber cable. It sends a visible 650nm wavelength red laser light through fiber optic cables, the breaks or faults in the fiber will refract the light, creating a bright glow around the faulty area. The universal connector can be used for all the most widespread fiber interfaces such as ST / SC / FC connector. It is suitable to test both single mode and multi mode cables. With an optional 2.5mm to 1.25mm adapter, users can even test for 1.25 mm fiber LC / MU connector.
   
The visibility is up to 3 Km. Internally there is also a specifically designed power circuit included; the APC ( Auto Power Control ) circuit provides steady power which avoids unstable laser output when the battery is low. The LD output signal can be switched on CW or Pulse mode to obtain different visual effects. There is a dust proof cover which will prevent dust from getting into the inside of the LD connector. The cover also helps evade incidental exposure of the laser directly into your eyes.
News